WT30

(WT30XK4A)

Features

  • Heavy-duty 3" construction trash pump
  • Easy starting Honda OHV commercial engine
  • 317 gal./min capacity
  • Solid handling capability up to 1 1/16"
  • Cast iron volute and impeller
  • Quick clean out port
  • In Store Pickup Only

$1,729.95
Engine GX270
Displacement 270 cc
Bore and stroke 3.0" x 2.3"
Compression Ratio 8.5:1
Oil Alert Std
Pump Type Trash Centrifugal Self-priming
Volute Rigid Mounted Cast Iron w/ Stainless Wear Plate
Impeller Conical Cast Iron
Mechanical Seal (Pump case / impeller) Silicon Carbide/Silicon Carbide
Priming time 90 sec. @ 16.4 ft.
Drive system Direct
Discharge capacity 317 gal/min
Suction port diameter 3"
Discharge port diameter 3"
Total head lift 82 ft.
Suction head lift 26 ft.
Maximum pressure 36 psi
Solids handling 1 1/16 inches
Dimensions (LxWxH) 26.0" x 19.5" x 20.3"
Dry weight 134 lb.
Fuel Capacity 1.4 gal
Run Time @ Max Discharge 1.5 hr
Strainer Part # 78325-YG1-003
Residential Warranty 3 years
Commercial Warranty 3 years
Heavy-duty 3" construction trash pump

Specially designed for job sites and applications where high volume trash water capacity is needed.

Easy starting Honda OHV commercial engine

The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.

317 gal./min capacity

Solid handling capability up to 1 1/16"

The specially designed impeller allows solids to pass through easily, without clogging.

Heavy duty full frame protection

Protects the pump, while offering a convenient tie down location for transport.

Easy quick clean out port

The WT30 is designed for quick and easy service. An easy access service port makes clean-out quick.

Replaceable stainless steel wear plate

The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs

Standard service tool

A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.

Durable silicon carbide mechanical seal

Features abrasion-resistant silicone-carbide seals for extended wear.

Cast iron volute and impeller

The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.

Isolation mounted engine and pump

High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.

Unique conical shaped impeller

The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.

3 year residential/commercial warranty

You can rest easy, knowing your pump is covered from top to bottom for 3 full years.

Protected by Honda Oil Alert®

Protects the pump by shutting the engine off when low oil is detected.

Large heavy duty metal strainer

The strainer allows up to 1 1/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.